Model: TDPM-750L, TDPM-1000L
|
Specification |
TDPM-1000L |
|
Working capacity |
400 to 1,000 L |
|
Full holding capacity |
1,200 L |
|
Design |
Floor mounted, vacuum, two planetary blades with a
high-speed stirrer |
|
Drives |
Two variable frequency, flameproof TEFC geared motors, 40 HP
and 60 HP (IE3, IP55) |
|
Blade orbital speed |
6 to 24 rpm |
|
Stirrer speed |
Up to 925 rpm |
|
Gearbox |
Heavy-duty inline helical, sealed |
|
Blades |
Stainless steel, twisted or rectangular |
|
Wetted parts |
Stainless steel, 304 or 316 |
|
Interior finish |
240 grit; mix can exterior 180 grit |
|
Seals |
Fluoroelastomer |
|
Vacuum hood |
Two 6 inch view and charge ports, 3 inch charge port, 4 inch
light port, 1/2 inch vacuum exhaust with nitrogen purge, 1/2 inch vacuum
transmitter |
|
Mix can |
Vacuum design, SS304 jacket (50 PSIG) on walls and bottom, 4
inch plug valve |
|
Temperature sensor |
PT-100 |
|
Mix can mounting |
Four non-sparking PU wheels, two fixed and two rotating |
|
Controls |
FLP operator panel with digital speed, vacuum and
temperature display, VFD panel in a safe area |
|
Power supply |
3 phase, 50 Hz, 415 V |
|
Discharge system |
DS-1000L follower plate, for Tipco 1,000 L internally
machined mix cans |
|
Discharge platen |
Stainless steel wetted surface, O-ring groove,
fluoroelastomer O-ring |
|
Discharge drive |
Self-contained hydraulic power unit, 3 phase, 50 Hz, 415 V,
with pressure gauge and raise and lower valve |
|
Pressure under the platen |
65 PSI |
|
Discharge controls |
Flameproof DOL starter |