Tipco Engineering
Mixing Series

Industrial Wall Putty Mixer Machine

It is widely used for mixing powder and powder, and powder and liquid. When mixing solid with liquid, a liquid spraying or aerosol spraying system is optional. Our Industrial Wall Putty Machine has a high-speed rotating cutter that can enhance mixing efficiency to break the caked material quickly. Quoted at 1 Ton and 2 Ton per batch, with a batch time of 10 to 20 minutes on a 25 HP drive.

Major Features

  • Mixes powder with powder, and powder with liquid
  • High-speed rotating cutter (chopper) breaks caked material quickly
  • Liquid spraying or aerosol spraying system optional
  • Plough-shaped mixing elements on a horizontal shaft
  • 25 HP drive through a helical gearbox
  • 1 Ton or 2 Ton per batch, 10 to 20 minute batch time
  • 6 mm shell in MS or SS304, 8 inch material outlet
  • Feed and discharge screw conveyors, silo and valve-bag packer available

Benefits

  • Even spread of polymer and additives through the whole batch
  • Lumps broken up before the putty leaves the mixer
  • A full batch in 10 to 20 minutes
  • One mixer at the centre of a complete putty plant
  • Bag filling at 10 to 50 kg with a filling error of ±0.2%
  • Built, serviced and supplied with spares from Sonipat

Technical Information



Plant equipment supplied with the mixer

Specification

WPM-1T

WPM-2T

Batch capacity

1 Ton per batch

2 Ton per batch

Batch time

10 to 15 minutes

10 to 20 minutes

Drive motor

25 HP, 1440 rpm

25 HP, 1440 rpm

Speed reduction

Helical gearbox

Helical gearbox

Mixing elements

Plough-shaped, horizontal shaft

Plough-shaped, horizontal shaft

Choppers

2, high speed

High speed

Shell

6 mm, SS304

6 mm, MS

Material outlet

8 inch

8 inch

Liquid addition

Spray system optional

Spray system optional

Item

Specification

Feed screw conveyor

7.5 HP, MS, standard length for the mixer

Discharge screw conveyor

7.5 HP, MS (optional)

Silo

4 or 5 Ton, MS, 3 mm shell, conical bottom with 2 inch outlet valve

Valve-bag packer

10 to 50 kg, filling error ±0.2%, single valve head, screw or pneumatic feed, air 0.7 m³/min at 0.5 MPa

Tell us what you're building — we'll tell you what it takes to make it.

Our engineering team is ready to help you find the right solution for your application.

Contact Us Download Catalogue
Chat on WhatsApp