Tipco Engineering
Mill Series

Tipco Nano Mill - Disc with Pegs

The Tipco Nano Mill uses a disc with pegs design for fine grinding applications. The pegged rotor generates high shearing force as material passes through the grinding chamber. It shares the chamber sizes, drive, separator, seal and controls of our Horizontal Bead Mill, with discs with pegs in place of plain discs. Models with 10, 15 and 25 L chambers run on 15 to 40 HP flameproof drives with a VFD.

Major Features

  • Discs with pegs for higher grinding energy than plain discs
  • Same chamber sizes, drive, seal and controls as the Horizontal Bead Mill
  • Tungsten carbide gap separator, 0.3 mm gap
  • Double mechanical seal with independent cooling, rated to 10 bar
  • Jacketed chamber, jacketed feed pipe and cooled end cover
  • Pressure and temperature measurement, 4 bar cut-off
  • Flameproof motor and control panel with VFD
  • For low and medium viscosity material

Benefits

  • More grinding energy for products that need a finer grind
  • Same operation and most spares as the Horizontal Bead Mill
  • Product temperature held by full cooling of chamber, feed pipe and end cover
  • Safe running with a 4 bar pressure cut-off and a 70 °C product limit
  • Bead size and charge matched to your product’s viscosity
  • Built, serviced and supplied with spares from Sonipat

Technical Information

Specification

TNM-10

TNM-15

TNM-25

Chamber volume

10 L

15 L

25 L

Grinding element

Discs with pegs

Discs with pegs

Discs with pegs

Main motor

15 HP, flameproof, IE2

20 HP, flameproof, IE2

40 HP, flameproof, IE2

Speed control

VFD, 0 to 1400 rpm

VFD, 0 to 1400 rpm

VFD, 0 to 1400 rpm

Disc tip speed

0 to 13 m/s

0 to 13 m/s

0 to 13 m/s

Flow (depends on product)

1 to 3 L/min

1 to 4 L/min

2 to 6 L/min

Grinding media

Zirconium beads, 0.8 to 2 mm

Zirconium beads, 0.8 to 2 mm

Zirconium beads, 0.8 to 2 mm

Media separator

Tungsten carbide gap separator, 0.3 mm gap

Tungsten carbide gap separator, 0.3 mm gap

Tungsten carbide gap separator, 0.3 mm gap

Contact parts

SS304

SS304

SS304

Mechanical seal

Double, independent cooling, rated to 10 bar

Double, independent cooling, rated to 10 bar

Double, independent cooling, rated to 10 bar

Cooling

Jacketed chamber, jacketed feed pipe, cooled end cover, seal cooling

Same

Same

Max product temperature

70 °C

70 °C

70 °C

Pressure cut-off

4 bar

4 bar

4 bar

Viscosity

Low to medium, typically 60 to 100 KU

Low to medium, typically 60 to 100 KU

Low to medium, typically 60 to 100 KU

Feed pump

AODD, 50 L/min, suits PMA and xylene

AODD, 50 L/min, suits PMA and xylene

AODD, 50 L/min, suits PMA and xylene

Control panel

Flameproof: HMI, VFD, RPM, feed pump control, product temperature, seal pressure, water in and out temperature, emergency stop

Flameproof: HMI, VFD, RPM, feed pump control, product temperature, seal pressure, water in and out temperature, emergency stop

Flameproof: HMI, VFD, RPM, feed pump control, product temperature, seal pressure, water in and out temperature, emergency stop

Tell us what you're building — we'll tell you what it takes to make it.

Our engineering team is ready to help you find the right solution for your application.

Contact Us Download Catalogue
Chat on WhatsApp