Tipco Engineering
Tipco Global

Lab Series

Lab Series machines are built for small-batch milling, dispersing and mixing, so you can prove a recipe at bench scale before moving to production.

7 products found
Lab Attritor Mill
Lab Attritor Mill
The Tipco LAT-0.1 Lab Attritor Mill grinds batches of up to 2 litres with 4 to 6 grinding rods on a geared 25 mm shaft. It runs on a 1 HP flameproof motor through a speed reduction gearbox, in a jacketed SS304 vessel that can be heated or cooled. Use it to test a grind at bench scale before moving to a production attritor.
Lab Basket Mill
Lab Basket Mill
The Tipco Lab Basket Mill (LMS-0.2) mills 4 to 5 L batches on the bench, in a 5 L SS316 jacketed tank. A 2 HP flameproof motor at 2880 rpm drives the basket mill shaft, a VFD sets the speed, and an electric lift raises and lowers the head. An extra high-speed disperser shaft in SS316 comes with it, so you can premix and mill on one machine.
Lab Ribbon Blender
Lab Ribbon Blender
The Tipco Lab Ribbon Blender is a ribbon mixer for laboratories and small production use. It blends dry powders, granules and other materials into a uniform mix, with the ribbon configuration and speed set to your material.
Lab Bead Mill
Lab Bead Mill
Tipco lab bead mills let you grind a formulation at bench scale before you commit to a production mill. The LBM-0.1 is a jacketed batch mill for 800 ml to 1 L, with impeller rods on a 25 mm shaft and a 1 HP flameproof motor. The THM-1 is a lab horizontal bead mill with a 1 L chamber, 0 to 1400 rpm by VFD and a feed of 100 to 400 ml per minute.
Lab Planetary Mixer
Lab Planetary Mixer
The Tipco Lab Planetary Mixer is a 5 L vacuum mixer for trying out thick adhesive and sealant recipes on the bench before you scale up. Planetary blades sweep the whole mix can while a high-speed stirrer disperses fillers, under vacuum, with a jacket to heat or cool the batch. It is the same design as our Dual Planetary Mixer.
Lab Sigma Mixer
Lab Sigma Mixer
The Tipco Lab Sigma Mixer kneads 3 to 5 L of thick, dough-like material in a jacketed U-trough. Heavy-duty Z-type dual blades in SS316 are driven by a 2 HP motor through a 30:1 worm gearbox. The jacket heats or cools the batch, and the trough tilts by hand to unload.
Lab HSD/Mixer
Lab HSD/Mixer
The Tipco Lab High Speed Disperser (LMS-0.2) disperses 2 to 5 L batches on the bench, so you can test a formulation before you choose a production disperser. A 2 HP flameproof motor at 2880 rpm drives a 3 in cowl blade, a VFD sets the speed, and an electric lift raises and lowers the head. The same machine takes a basket mill shaft for lab milling.
Chat on WhatsApp