Tipco Engineering
Mill Series

Horizontal Ceramic Bead Mill

The Horizontal Ceramic Bead Mill is built for demanding formulations where metal contamination must be kept low and wear needs to stay low over long production runs. It shares the drive, separator, seal and controls of our Horizontal Bead Mill, with a ceramic grinding chamber in place of steel. Models with 10, 15 and 25 L chambers run on 15 to 40 HP flameproof drives with a VFD.

Major Features

  • Ceramic grinding chamber to keep metal contamination low
  • Same drive, seal and controls as the Horizontal Bead Mill
  • Tungsten carbide gap separator, 0.3 mm gap
  • Double mechanical seal with independent cooling, rated to 10 bar
  • Jacketed chamber, jacketed feed pipe and cooled end cover
  • Pressure and temperature measurement, 4 bar cut-off
  • Flameproof motor and control panel with VFD
  • For low and medium viscosity material

Benefits

  • Lower metal pickup for light shades and high-purity pigments
  • Low wear when grinding abrasive fillers
  • Same operation and spares as the Horizontal Bead Mill
  • Safe running with a 4 bar pressure cut-off and a 70 °C product limit
  • Bead size and charge matched to your product’s viscosity
  • Built, serviced and supplied with spares from Sonipat

Technical Information

Specification

THC-10

THC-15

THC-25

Chamber volume

10 L

15 L

25 L

Grinding chamber

Ceramic lined, jacketed

Ceramic lined, jacketed

Ceramic lined, jacketed

Main motor

15 HP, flameproof, IE2

20 HP, flameproof, IE2

40 HP, flameproof, IE2

Speed control

VFD, 0 to 1400 rpm

VFD, 0 to 1400 rpm

VFD, 0 to 1400 rpm

Disc tip speed

0 to 13 m/s

0 to 13 m/s

0 to 13 m/s

Flow (depends on product)

1 to 3 L/min

1 to 4 L/min

2 to 6 L/min

Grinding media

Zirconia beads, 0.8 to 2 mm

Zirconia beads, 0.8 to 2 mm

Zirconia beads, 0.8 to 2 mm

Media separator

Tungsten carbide gap separator, 0.3 mm gap

Tungsten carbide gap separator, 0.3 mm gap

Tungsten carbide gap separator, 0.3 mm gap

Mechanical seal

Double, independent cooling, rated to 10 bar

Double, independent cooling, rated to 10 bar

Double, independent cooling, rated to 10 bar

Cooling

Jacketed chamber, jacketed feed pipe, cooled end cover, seal cooling

Jacketed chamber, jacketed feed pipe, cooled end cover, seal cooling

Jacketed chamber, jacketed feed pipe, cooled end cover, seal cooling

Max product temperature

70 °C

70 °C

70 °C

Pressure cut-off

4 bar

4 bar

4 bar

Viscosity

Low to medium, typically 60 to 100 KU

Low to medium, typically 60 to 100 KU

Low to medium, typically 60 to 100 KU

Feed pump

AODD, 50 L/min, suits PMA and xylene

AODD, 50 L/min, suits PMA and xylene

AODD, 50 L/min, suits PMA and xylene

Control panel

Flameproof: HMI, VFD, RPM, feed pump control, product temperature, seal pressure, water in and out temperature, emergency stop

Flameproof: HMI, VFD, RPM, feed pump control, product temperature, seal pressure, water in and out temperature, emergency stop

Flameproof: HMI, VFD, RPM, feed pump control, product temperature, seal pressure, water in and out temperature, emergency stop

Tell us what you're building — we'll tell you what it takes to make it.

Our engineering team is ready to help you find the right solution for your application.

Contact Us Download Catalogue
Chat on WhatsApp